Round Gas Range Oven Ignitor for GE 41-208 ER4342528 SGR401 SGR400
-
Detail
- Gas Igniter for Stove Range, Replacement Part No. SGR403
- SPECS:This igniter's amperage range is 2.5 - 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper.
- Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor; ignitors are fragile and will break easily.
- Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor.
- Description:Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn't ignite the burner tube.
SGR Series Direct Replacement Round Range Igniters
Highest density silicone carbide –greater physical strength
Double helix spiral design – requires less current to light
Easy installation – no modifications or adapters necessary
SGR403 GR403/GR423
3 ½" Long
Blodgett
11511 , 17952
Electrolux / Athens
A00P235030 , P235030
Electrolux / Gibson
A1505523 , A1505786 , AP00235030 , AP235027 , AP235030
Electrolux / Westinghouse
Q000198333
FMP
187-1076
GE / Hotpoint / Penncrest
GM142027 , WB2X5195 , WB2X9154 , WB13K4 , WB13K3 , WB13K1 , WB13K10027 , WB13K1 , WB13K04 , WB13K0004 , WB13K0003 , WB13K0001 , WB02X9154 , WB00X6640 , WB2X97581
GE / Roper / Sears / Whirlpool
300259 , 319887 , 327617 , 330689 , 337263 , 4336387 , 4338008
4336387 , 4338008
Market Forge
10-8259
Roper
300259 , 319887 , 327617 , 330689 , 337263
Sears / Coldspot / Kenmore
7954 , 9360 , 9502 , 300259 , 319887 , 327617 , 330689 , 337263 4336387 , 4338008
Surface Igniter / Carborundum
RA272
Whirlpool
300259 , 313584 , 3196447 , 319887 , 321342 , 327263 , 327617 330689 , 337263 , 4157446 , 4322910 , 4328133 , 4331193 , 4331669
4332948 , 4333355 , 4333356 , 4335338 , 4336387 , 4338008 , 4338036
4342525 , 4342528 , 4349502 , 4389493 , 8053999 , 814289 , 816928
8184969
Designed to fit specific gas range models including Whirlpool, Roper, Kirkland, General Electric, Hotpoint, RCA and others.
Non-OEM Replacement Part -
Customer ReviewsNo comments