ZXMT Tire Repair Machine Auto Tire Repair Tool Kit 110V for Car Truck Vulcanizing Machine Tire Spreader Tool
-
Detail
- This tire repair machine with large capacity, fully rotating C-frame accommodates different wheel sizes and allows for vertical or horizontal repairs
- An adjustable, swing-open, rotating C-frame cavity simplifies tire loading and unloading while maximizing stability
- Vulcanizing repair process cures the patch and inner tire lining to form a dense, sealed repair job
- Curing heads can be operated individually or simultaneously for maximum repair efficiency
- Long-life Acme thread hand-wheel screw applies over 4,000-lbs. of pressure and heat for maximum adhesion of patch to casing
ZXMT Tire Auto Repair Machine Kit 110V-220V for Car Truck
Specifics:
Input Voltage :220V/ 110v
Automatic temperature:140℃-165℃
Vulcanizing area:100*100mm 118*118mm
Package Include:1 set of Tire Auto Repair machine Kit
Tire repair method:
1. Clean the surface of the wound where the tire needs to be repaired and mark it.
2. Use a grinding machine to grind the surface of the wound, the area is slightly larger than the wound
3. Use the brush to raw rubber and gasoline blending good mortar (or hot glue) evenly coated on the polished
4. Cut the appropriate size of the rubber, it will fill in the wound
5. Pressure the hot head on raw rubber (if possible can pad a thin layer of aluminum or iron in the raw rubber), try to put the wound in the central heating head, pressing screw, fixed tires
6. Turn on the timer switch and set it in the right place, Cold start can refer to "20" (Or adjust the vulcanizing time according to the temperature and the condition of the wound) the heat start time can be a little shorter,if you do not need timing can be set on the manual gear, then the hot head to work
7. At the end of vulcanization, tire repair machine automatically cut off power supply hot head
8. Turn off the power switch, loosen the screw tire pressure, carefully remove the hot head, remove the tire -
Customer ReviewsNo comments